|Place of Origin:||China|
|Minimum Order Quantity:||1 unit|
|Packaging Details:||nude packing, fix in container|
|Payment Terms:||T/T, L/C, Western Union, MoneyGram|
|Supply Ability:||300 units per month|
|Truck Weight::||12450kg||Fork Size::||1520*175*75|
|Power Souce:||Diesel Engine||Lifting Height:||3m|
|Attachments:||Paper Roll Clamp ,bale Clamp, Rotating Clamp||Warranty:||1 Year Or 2000 Working Hours|
|Mast:||Two Or Three Mast||Optional:||Side Shift ,solid Tire,|
diesel engine forklift truck,
warehouse forklift trucks
fork lift truck machine 10 ton diesel container forklift with 3m lifting height
10 ton forklift Feature
Forklifts are widely used in port, railway station, airport, freight yard, factory workshop, warehouse, distribution center and distribution center. Handling, loading and unloading of pallet goods in cabins, cars and containers are essential for pallet transportation and container
1) the higher you are lifting a load the lower the capacity will become.
2) if you add an attachment this will also effect the unit's capacity.
3) Non-standard over sized goods will cause load centre move forward to effect capacity.
Lift Height & Collapsed Height:
besides how high you want to lift up your material, you also need to pay attention to forklift collapsed height for reasons: low doors you need to passby, ceillings in the building you are working, ceillings in the trucks you are loading/unloading.
1) depending on enviroment in door or outdoor: diesel, gas/LPG or battery forklift
2) ground in good condition or with stones or scraps everywhere: what types of tire is proper, air tires, solid tires or no-marking tires?
3) special environment: cold storage etc
whether or not an attachment needs for working.
Do I need to stack goods in narrow warehouse? right-angle stack aisle width
Do I need a pressure regulator valve when forklift reserved with 3rd or 4th valve for attachments?
The specification of 10 ton forklift
|Dimension||9||Max. lifting height||mm||3000|
|12||Tilt range||Mast forward/backward||deg||6/12|
|13||Overall length(without fork)||mm||4255|
|15||Mast height (fork lowering)||mm||2850|
|16||Overall height fork raised||With backrest||mm||4330|
|17||Height to head guard||mm||2560|
|19||Front face of fork to front axle||mm||710|
|20||Min. right angle stacking aisle||pallet size :1100×1100 add clearence||mm||6250|
|Performance||21||Speed||Max Travelling full/no load||km/h||24/30|
|22||Lifting full/no load||mm/s||390/410|
|23||Lowering full/no load||mm/s||470/340|
|24||Max.drawbar pull||full/no load||kg||5850/3200|
|25||Gradeability at 1.6km/h||full load||%||22|
|Max. Gradeability||full/no load||%||24/20|
|27||Weight distribution||Full load front/rear||kg||20160/2290|
|28||No load front/rear||kg||5480/6970|
|34||Ground clearence||At lowest point(mast)||mm||245|
|35||Brake||Service brake||power brake|
|Parking brake||Mechanical-hand lever|
|Number of cylinders||6|
|Fuel tank capacity||L||140|
|38||Transmission||shift stage(front/rear-type)||2-2 automatic|
|39||Operating pressure||Hydraulic system pressure||kg/cm²||200|
Nowadays more than 60 agents around the world can supply LTMG professional after-sale service.
All the products of LTMG supplied with one year or 2000 workling hours (which occurs first) period quality warranty.
Detail clauses and policies please see to our website and product’s quality certificate.
1.What Certificate do you have?
LTMG workshop meet with the ISO9001:2008 Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2. Can you customize and design as the clients' requirement?
LTMG will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the LTMG warranty policy for each model.
4. Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5. What payment terms do you accept?
Normally 30% T/T in advance as deposit, blance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
Standard configuration products are always in stock.
The production period of Customizing products is 30 days.